Living & Co YF-ST1638, Инструкция по эксплуатации

Страница: 14 / 16

Other Useful Information
Cleaning and maintenance
·
·
·
·
·
·
WARNING!
·
·
·
Fig.4
12
1300 886 649 AU 1300 886 649 AU
13
Before cleaning, maintenance or moving the fan, and before removing a
front or rear grille, switch off the fan and unplug it from the wall outlet.
Do not immerse the fan in water or other liquids. Do not spray it with
liquids. Do not allow water to drip on or into the fan motor housing.
Never use petrol, solvents, harsh detergents, or abrasive or alkaline
cleaners on the fan.
Dusting: Clean your fan periodically by lightly running a vacuum cleaner
nozzle (soft brush) over the front and rear grilles to remove any dust or dirt
that may have accumulated inside or on the unit. Alternatively, use a soft,
dry cloth for dusting.
Stubborn stains: Use a slightly damp, soapy cloth for stubborn stains but
be sure the cloth is not too wet. Use caution around the motor housing. Do
not allow the motor or other electrical components to be exposed to water.
Blade cleaning: If the blades need cleaning, first remove
the front grille by loosening the fan grille securing clips
along with securing screw (refer Product Specifications
Page 5) (Fig.4). Wipe the blades clean using a damp
cloth, dry thoroughly. Refit the front grille and ensure all
the screws and washers are inserted and tightened
properly.
Storage: In the off season, store the clean and dry fan in
a safe, dry location, protected from dust. We recommend
using the original carton for storage of the disas sembled
Service/repair: The appliance requires no maintenance and contains no
user-serviceable parts. Do not attempt to take the motor unit apart, repair or
modify it. Do not operate the fan if its power cord or plug is damaged,or when
it is working abnormally. In case of damage or malfunction, or if the cord is
damaged, have the unit repaired by trained personnel only, or contact the
after sales support line for advice on repair or replacement.
Before phoning for a service, please ensure that your fan is properly
assembled and all parts are undamaged and in good working order. Also
ensure that the front and rear grilles are clean and free of obstructions and
that the fan is properly connected to your power supply.
product (follow the assembly instructions in reverse order to disassemble).
Alternatively, place a large plastic bag or old towel over the top of the cleaned
appliance for dust protection.