background image

14

The temperature inside the 
freezer is too cold.

The temperature control is set too cold. Turn
the control to a warmer setting and allow
several hours for the temperature to stabilize.

The thermostat is set to the highest (

super

)

position, which causes continuous running

 

of

the compressor and bypasses the
temperature control.

The temperature of the external 
freezer surface is warm.

The exterior freezer walls can be warmer
than room temperature. This is normal while
the compressor works to transfer heat from
inside the freezer cabinet.

There is a popping or cracking 
sound when the compressor 
comes on. Does that indicate 
a problem with cooling 
performance?

Metal parts undergo expansion and

contraction, just as hot water pipes. This is

normal. The sound will level off or disappear

as the freezer continues to run.

There is a bubbling or gurgling 
sound, like water boiling.

Refrigerant (used to cool the freezer) is
circulating throughout the system. This is
normal.

There are vibrations; what is 
causing them? How can I stop 
the vibrations?

Check to ensure that the freezer is on a level
surface.

The floor is uneven or weak. The freezer

rocks on the floor when it is moved slightly.

Be sure your floor can adequately support

the freezer.

Put a piece of metal or timber underneath
parts of the freezer to level it.

The freezer is touching the wall. Re-level the
freezer and move it away from the wall.

Moisture forms on the inside 
freezer walls.

Hot and humid weather increases the internal
rate of frost build-up. This is normal.

The lid is slightly open.

The lid is kept open too long, or is opened
too frequently. Open the lid less often.

The lid is not sealed properly.

Moisture forms on the outside of 
the freezer.

The lid is slightly open, causing cold air from
inside the freezer to meet warm, moist air
from the outside.

The lid does not close properly.

The freezer is not on a level surface.

The 

lid seal

 is dirty.

The storage basket is out of position.

1.

4

HS 384CN and HS 185CN Chest Freezer IM cv 09 07 2020.indd   14

15/07/2020   5:47:02 pm

Содержание TWL-CF418L





















Отзывы: