13
Cleaning And Maintenance
Troubleshooting
● For oil spots on the cooker plate, wipe the cooker plate by using a soft moist
cloth with a little tooth paste or mild detergent. And then use a soft moist cloth to
wipe it until no stain remains.
● When not using it for a long time, please disconnect the power plug from the
power outlet and protect the induction cooker from any dust or bugs.
The “ON/STANDBY” indicator lights
up and the display works normally,
but heating does not start.
After plugging in the power cord and
pressing the e “ON/STANDBY” button,
the indicator and display do not light up.
Abnormalities
Key checking points and trouble shooting
Is the power plug properly connected?
Is the switch, power outlet, fuse or power cord
damaged?
Is the pot material proper?
Is the appliance in a “Preset” working status?
For other causes, please take the appliance to a
repairing and maintenance site to be fixed.
Please contact the special maintenance
department.
Wait a moment and press the “ON/STANDBY”
button when the temperature of the hotplate
becomes normal, the induction hotplate will
operate as usual.
Turn off the hotplate, when the voltage becomes
normal, and then turn on the hotplate, it will
operate as usual.
Heating suddenly stops during the
process.
Code of failure
Is the temperature of the oil too high when
frying dishes?
Is the temperature of the surroundings very
high?
Is the air inlet or air outlet of the induction
cooker blocked?
Is the default heating time of the induction
cooker over?
The self-safety protection of the induction
cooker starts, wait for several minutes and
connect power to use it.
E1 E2 E4
E5 Eb
E3 E6
E7 E8
During using, if there are some abnormal cases, please unplug
immediately and disconnect power.
For any failure of the product, please contact the special maintenance
department or the customer service center.
Emergency
