9
Operation Instructions
Product Introduction
Before using New Induction cooker
● Read this guide, taking special note of the "Safety Warnings" section.
● Remove any protective film that may still be on your ceramic plate.
Using the Touch Controls
● The controls respond to touch, so you don't need to apply any pressure.
● Use the ball of your finger, not its tip.
● You will hear a beep each time a touch is registered.
● Make sure the controls are always clean, dry, and that there is no object (e.g. a
utensil or a cloth) covering them.
Even a thin film of water may make the controls difficult to operate.
Put the pot on the ceramic plate
●
Make sure the air vents are not blocked and keep utensils away from the
immediate surrounds of the ceramic plate.
●
Make sure the cookware which has food or liquid is placed in the center of
ceramic plate.
Plug in
●
After the power supply is connected, a beep will be heard. The display shows
“L”, indicating that the induction cooker is in standby mode.