Attachment / removal of massage nodes:
The massage heads attach to the output shaft via a screw
threaded fixing. Simply align the required massage node
socket with the output shaft and rotate clockwise to screw
the head in place, ensure secure but do not over tighten to
avoid damage or later difficulty removing.
To remove, simply grasp the massage node with one hand
whilst holding the massager body with the other and rotate
anticlockwise to unscrew and loosen off.
WARNING: To avoid personal injury, never attempt
attachment or removal when the massager is in operation.
Charging the massager:
For best results charge the massager before use.
1. Insert the small plug end of the power adaptor into the
charging socket of the massager.
2. Plug the adaptor CHARGER into an electrical outlet.
3. The LED light on the charger will illuminate red when the
battery is charging. The light will change to green when
charging is complete.
WARNING: The massager should not be used while it is
charging.
2
130 0 886 649
A U
