●
Now move each fader from top to bottom (or vice versa) making sure each
fader goes from 0 to 127.
●
If you have streaming MIDI information or fader(s) that don’t work properly,
reload the “
” file and double check your wiring, solder
joints, components & connections.
○
NOTE: The Brain Jr. that shipped with your kit is already loaded with
the editor settings, ( .lmd file), that works for the Button Box. If you
run into any issues, here’s how to reload that file.
○
Download “Button_Box_1.0.lmd”.
○
In Brain Configure, click “open file”. Open “Button_Box_1.0.lmd” and
then click “Save to Brain”.
8) Mount the Brain Jr.:
Place three of the adhesive rubber bumpers on the bottom of the
Brain Jr. in a triangular shape to keep it from grounding out on the metal housing. Mount
the Brain Jr. to the Button Box metal housing (Bottom) using the four 4-40x1/4" machine
screw and four of the 4-40 nylon lock nuts. Do not over tighten the nuts as it can bend and
damage the circuit board. Double check your wiring to the Brain Jr. in case any wires
popped out.
