Technologies , Inc
.
Technologies , Inc
.
Fiber Checker
Page 5 of 8
2009Y VER A
Liverage Technology Inc.
3F-3, No. 30 Taiyuan Street, Chupei City, Hsinchu County 302, Taiwan
TEL:+886-3-5525268 FAX: +886-3-5525388
http://www.liverage.com.tw
E-mail: [email protected]
Copyright 2009
,Liverage Technology Inc. reserves the right to modify specifications without prior notice
3. Operating Instructions
To touch then bend the Dust Cap to open the connector
To press to release Linchpin then to push
Battery Lid backward.
To open Battery Lid to change batteries.
1. Dust
Cap : prevent dirt contaminates the LD
2. Button : pressing to Turn On / Turn Off the LD emitting.
3. Mode
Switch : to select CW Continuous Wave Mode / Pulse Mode.
4. Pen
Clip : a design to fasten the tool while put inside pocket.
5. Battery
Lid : to open to change batteries.
6. Linchpin : a mechanical design to lock the Battery Lid.
1. The Fiber Checker is powered by two pieces 1.5 V AAA batteries
2. To check the power on please press the button and see if the LED is
GREEN.
3. Lift the front of the dustproof up and insert on end of the fiber
connector to the universal connector or directly insert to an output
connector of the fiber or patch cord.
1
2
3
4
5
1
6
