Before cleaning the fan, please read the following:
• Always unplug the fan and disconnect from power before cleaning.
• Use only a soft, damp cloth to gently wipe the outer surfaces of the fan.
• Do not immerse the fan in water or other liquid and never allow water to drip on
the motor housing.
• Do not use gasoline, paint thinner, or any other corrosive cleaning solutions to
clean the fan.
• To clean between the grills, we recommend using a pipe cleaner, flexible dust
wand, vacuum cleaner or compressed air to gently remove dust.
• If the fan will not be in use for an extended period of time, you may leave the fan
assembled. Cover to protect from dust. Store in a cool, dry place.
Maintenance
Cleaning the Fan & Replacing the Battery
Cleaning the Fan:
1. Turn over remote control. Press tab A toward the right and pull.
FIGURE 5.
2. Pull out battery holder B and replace the battery. Only use the specified battery
type (Lithium Button Cell Battery CR2025). The battery must be installed with the
positive side facing up.
FIGURE 6.
3. Insert battery holder B back into remote.
FIGURE 7.
Note:
Do not apply excessive force to battery holder. Remove battery when not
using for an extended period of time. When disposing of used battery, please use
the correct method of disposal.
Replacing the Remote Control Battery:
Figure 5
Figure 6
Figure 7
3
1
A
2
B
Battery : Lithium Button Cell Battery (CR2025)
WARNING
Keep the lithium battery out of
reach of small children.
Small children may accidentally swallow it.
If swallowed, call your doctor immediately.
7
