LIVARNO home 353560_2010, Инструкция по сборке, эксплуатации и безопасности

Страница: 11 / 61

11 GB
to increase the sensitivity of the sensor (see
Fig. C).
Note: The motion detector
9
responds to
heat radiation. When outdoor temperatures
are low, it is more sensitive to body heat
than when outdoor temperatures are warm.
Be sure to regulate the sensitivity of the
sensor over the course of the year.
Setting the daylight level
Turn the rotary control LUX
17
on the bottom
of the motion detector
9
clockwise to
increase the daylight level. In position , the
motion detector
9
only responds at pitch-
black night (approx. 5 lx). In position ,
the motion detector
9
also responds at
daylight levels, as long as about 20,000 lx
are not exceeded (see Fig. C).
Orientating the motion
detector
Loosen the fastening screws
7
of the
motion detector
9
.
Turn the rotary control LUX
17
to position
. Orient the motion detector
9
into the
central region of the desired coverage area.
Move about through the coverage area un-
til you are satisfied with the response char-
acteristics of the motion detector
9
. To find
the proper orientation, change the position
of the rotary control SENS
18
or the orien-
tation of the motion detector
9
.
Re-tighten the fastening screws
7
to fix the
adjustment.
Turn the rotary control LUX
17
to the desired
position. These can be determined during
the dawn or twilight hours during which the
spotlight
10
should respond. Slowly turn
the rotary control LUX
17
clockwise until it
reacts to movement within the coverage area.
Cleaning and storage
Press the ON / OFF switch
11
into the OFF
position if you will not be using the product
and want to store it.
Check the motion detector
9
and the solar
cell
12
for dirt regularly. If dirt or is present,
remove it to guarantee flawless function of
the product.
During the winter, keep the product and
especially the solar cell
12
free from snow
and ice.
Clean the product with a lint-free, slightly
moist cloth and mild cleaning agent.
Troubleshooting
= Fault
= Cause
= Solution
= The product does not switch on.
= The ON / OFF switch
11
is in the
OFF position.
= Press the ON / OFF switch
11
into the ON
position and red LED indicator of ON / OFF
switch
11
lights on at the same time.
= The rotary rotary control LUX
17
is adjusted
too dark.
= Adjust the rotary control LUX
17
so it is
brighter.
= The motion detector
9
is dirty or is incor-
rectly oriented.