8 GB/IE
LED Ceiling Light
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
This light is suitable only for use in dry rooms. The
light is not intended to be used for commercial pur-
poses.
Parts description
1
Dowel
2
Mains power lead (external)
3
Fabric tube
4
Lamp housing
5
Terminal block
6
Screw
7
Protective cap
8
Spotlight
Technical Data
Operating voltage:
230 V~ 50 Hz
Light bulb:
20 SMD-LED‘s per
spotlight (LEDs not
replaceable)
Protection category:
II
Total power consumption: approx. 10.5 W
Model number:
HG00099A (triangle,
chrome-plated),
HG00099B (triangle,
titanium-coloured),
Z31708C (rail, chrome-
plated), Z31708D (rail,
titanium-coloured)
Scope of delivery
1 LED Ceiling Light
2 Screws
2 Dowels Ø 6 mm
2 Protective caps
2 Fabric tubes
1 Installation instructions
Safety information
PLEASE READ THE ASSEMBLY INSTRUCTIONS
BEFORE USE! PLEASE KEEP THE ASSEMBLY
INSTRUCTIONS IN A SAFE PLACE!
This appliance may be used by chil-
dren age 8 years and up, as well as
by persons with reduced physical,
sensory or mental capacities, or lacking experi-
ence and / or knowledge, so long as they are
supervised or instructed in the safe use of the
appliance and understand the associated risks.
Children should not be allowed to play with the
appliance. Cleaning and user maintenance
should not be performed by children without
supervision.
This lamp is suitable only for use
indoors.
0.5 m
FIRE HAZARD!
Fit the light so that
it is at least 0.5 m away from the
material illuminated. Fire can result
from the development of too much heat.
The illuminant is not replaceable.
If the illuminant fails at the end of its life, the
entire light must be replaced.
