Daylight Lamp LTL 20 A1
24 - English
Getting Started
Powering the Device On/Off
Plug the power plug into a suitable power socket. No extension cables or multiple outlet strips
should be used that do not meet safety requirements.
Press the On/Off switch (1) to position "I" to power the light on.
Press the On/Off switch to position "0" to power the light off.
Notice on Mains Separation.
The device is only fully separated from the mains when the mains plug is pulled out of
the wall outlet. Switching off the device with the incorporated switch does not
disconnect the appliance from the mains.
Flexible Gooseneck
The flexible gooseneck (3)allows you to easily adjust the direction of the lamp to suit your needs.
When doing this always make sure the lamp is on a stable surface.
Do not turn the gooseneck more than 45º to the left or right.
Do not bend the gooseneck towards the back, but instead turn the whole light housing round if
you want the light to shine backwards.
