8 GB
burns on contact with the skin. Wear suitable
protective gloves at all times if such an event
occurs.
In the event of a leakage of batteries / recharge-
able batteries, immediately remove them from
the product to prevent damage.
Only use the same type of batteries / recharge-
able batteries. Do not mix used and new batter-
ies / rechargeable batteries.
Remove batteries / rechargeable batteries if the
product will not be used for a longer period.
Risk of damage of the product
Only use the specified type of battery / recharge-
able battery!
Insert batteries / rechargeable batteries accord-
ing to polarity marks (+) and (-) on the battery /
rechargeable battery and the product.
Clean the contacts on the battery / rechargeable
battery and in the battery compartment before
inserting!
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Before use
Note:
Remove all packaging materials from the
product.
Bringing into use
Inserting / changing the batteries
Note:
Remove the insulating strips before using the
product for the first time.
Turn the battery compartment cover
1
anticlock-
wise and take it off the battery compartment
3
(see Fig. A).
Insert the (new) batteries
2
into the battery
compartment
3
.
Note:
Make sure you fit the batteries
2
the
right way round (polarity). The correct polarity
is shown inside the battery compartment
3
.
Put the battery compartment cover
1
back in
place on the battery compartment
3
and turn
it clockwise to tighten it (see Fig. B).
Attaching the product
Pull off the protective films from the self-adhesive
pads
4
of the battery compartment cover
1
(see Fig. C).
Attach the product in the desired location.
Note:
The substrate should be dry, smooth and
free of dust and grease.
After prolonged use of the adhesive pads
4
,
sticky residues may remain on the surface when
removed; use an adhesive remover, if necessary.
Содержание 300519
Страница 3: ...B A C D 5 1 2 3 4...
Страница 4: ......
