LIVARNO LUX 291530, Инструкции по эксплуатации и безопасности

Страница: 13 / 48

14 GB/IE
Disposal / Warranty and service
Do not cover the lamp with objects. Excessive
heat can result in fire.
Do not look into the illuminant from a close
distance during operation.
Do not use optical instruments to look at the
illuminant.
In order to disconnect the light completely from
the power supply, the mains plug must be
removed from the socket.
Only use the light bulbs specified in the chapter
„Technical data“.
Initial use
Mounting the lamp
Note: Remove all packaging materials from the
product.
Only 14128306L:
Caution: The lamp glass
2
and the ring
nut
1
are pre-assembled, but are not screwed
tight.
Loosen the ring nut
1
from the lamp socket
3
.
Lift the lamp glass
2
from the lamp socket
3
.
Remove the transport protection.
Place the lamp glass
2
onto the lamp socket
3
.
Bring the lamp glass
2
into the correct
position.
Only 14128402L:
Loosen the ring nut
1
from the lamp socket
3
.
Bring the lamp glass
2
into the correct position.
All models:
Screw the lamp glass
2
to the ring nut
1
. Be
sure they are positioned correctly.
Use a clean, lint-free, dry cloth to insert the
bulb
5
.
Screw the light bulb
5
clockwise into the
lamp socket
3
.
Plug the mains plug
4
into a properly installed
socket.
Your light is now ready to use.
Switching the light on / off
Touch the lamp base
6
to switch the lamp on
or off.
Dimming the lamp
The lamp is only dimmable using the light bulb
5
supplied. To dim the light bulb
5
in the
lamp, switch the lamp on and off by touching
the lamp base
6
multiple times in short suc-
cession.
Changing the light bulb
Switch the lamp off.
RISK OF ELECTRIC SHOCK!
First unplug the mains plug
4
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Use a clean, lint-free, dry cloth when replacing
the illuminant
5
.
Unscrew the defective illuminant
5
from the
lamp socket
3
, turning counter-clockwise.
Screw a new illuminant, clockwise into the
lamp socket
3
.
Plug the mains plug
4
into a properly in-
stalled socket.
Your light is now ready to use.
Maintenance and Cleaning
Switch the lamp off.
RISK OF ELECTRIC SHOCK!
First remove the mains plug
4
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Safety / Initial use / Changing the light bulb / Maintenance and Cleaning