13
GB/IE/NI
Note:
The built-in charging controller of the product prevents the
rechargeable batteries from overcharging.
Replace the rechargeable batteries if the light output does not improve
after charging (see „Replacing the rechargeable batteries“).
Installation
Note:
Before mounting, decide where you want to mount the solar
cell
10
and the main unit
1
. Please remember the connection cable
11
between the solar cell and the main unit is approx. 5 m long.
Note:
The included mounting material is suitable for ordinary solid
concrete or masonry construction. Other wall substrates may require
other fastening materials. Seek specialist advice if necessary.
Note:
You will need an electric drill.
CAUTION! RISK OF INJURY!
Please read the operating
instructions for your drill.
CAUTION!
Ensure that you do not damage any electricity cables
in the wall or ceiling.
Mounting the main unit
Please remember when selecting the location for mounting the main
unit
1
:
1. Make sure the LED spotlight
2
illuminate the desired area. You
can move the LED spotlight
2
independently in various directions.
2. Depending on the mounting height (ideally at 2 m) the motion de-
tector
3
has a detection range of max. 8 m with a detection an-
gle of 140° horizontally and 90° vertically.