LIVARNO LUX 271694, Инструкция по сборке, эксплуатации и безопасности

Страница: 14 / 56

12 GB
within a time window of approx.
5 seconds to 7½ minutes.
Adjusting the sensi-
tivity of the sensor
Turn the SENS rotary control
15
on the bottom of the motion
detector
9
clockwise to in-
crease the sensitivity of the
sensor.
Note: The motion detector
responds to heat radiation.
When outdoor temperatures
are low, it is more sensitive to
body heat than when outdoor
temperatures are warm. Be
sure to regulate the sensitivity
of the sensor over the course
of the year.
Note: Please observe that the
motion detector primarily
detects movements transverse
to the motion detector. If you
move directly towards the mo-
tion detector, it cannot detect
this movement.
Setting the
daylight level
Turn the LUX rotary control
17
on the bottom side of the mo-
tion detector
9
clockwise to
increase the daylight level: In
the position, the motion de-
tector only reacts at night (at
approx. 20 lx). In the posi-
tion, the motion detector also
responds at daylight levels, as
long as about 20,000 lx are
not exceeded.
Aligning the
motion detector
Note: Perform this adjustment at
twilight.
Loosen the locking screw
(motion detector)
8
.
Turn the LUX rotary control
17
to position .
Align the motion detector
9
into the central region of the
desired coverage area.
Move about through the cover-
age area until you are satisfied