8 GB
Safety / Preparation / Preparing the product for use
Safety
To avoid danger to
life from electric shock
Every time before connecting the lamp the mains,
check it and the mains lead for damage. Never
use your light if you find it is damaged in any way.
A damaged light bulb means your life is at
risk from electric shock. If there is any damage,
repairs to be carried out or other problems re-
lated to the light bulb, please contact the service
centre or a qualified electrician.
In order to prevent hazards, if the outer flexible
cable of this lamp becomes damaged it may
only be replaced by the manufacturer, a service
representative of the manufacturer or a similar
specialist!
Before assembly, ensure that the mains voltage
available corresponds to the operating voltage
necessary of the light (see „Technical Data“).
Never let the lamp come into contact with water
or other liquids.
Always unplug the light from the mains prior to
assembly, disassembly, cleaning or if the light
will not be used for extended periods.
Never open or insert anything into electrical
fittings or equipment. Doing this sort of thing can
lead to a serious danger to life from electric shock.
Do not kink the power cable.
Do not lay the cable on sharp corners.
To avoid danger
of fire and injury
CAUTION! RISK OF INJURY!
Check bulbs for damage immediately after
unpacking. Do not fit defective bulbs into the
light. If they are, contact the service point for a
replacement.
CAUTION! RISK OF BURNS
DUE TO HOT SURFACES!
Ensure the lamp has been switched off and
allowed to cool before you touch it. In this way
you will avoid the danger of burns. Bulbs give
off a lot of heat around the top of the lamp.
Do not cover the light or the mains plug with
objects. Excessive heat can result in a fire.
Never leave the lamp operating unattended.
ATTENTION!
Do not look into the LED from a close distance
during operation.
Do not look at the LED with an optical instru-
ment (e.g. magnifier).
The illuminant in this light is not replaceable; if
the illuminant reaches the end of its services
life, replace the entire light.
Working safely
Install the light so that it is protected from
moisture and dirt.
Prepare carefully before assembly and allow
yourself enough time. Lay out all the individual
components and additional tools or materials
required so that you can see and reach them.
Remain alert at all times and always watch what
you are doing. Always proceed with caution
and do not assemble the lamp if you cannot
concentrate or feel unwell.
In order to disconnect the light completely from
the power supply, the mains plug must be
removed from the socket.
Safety instructions for
batteries / rechargeable
batteries
DANGER TO LIFE!
Keep batteries / rechargeable batteries out of
reach of children. If accidentally swallowed
seek immediate medical attention.
DANGER OF EXPLOSION!
Never recharge non-rechargeable batteries.
Do not short-circuit batteries / rechargeable
batteries and / or open them. Overheating, fire
or bursting can be the result.
Never throw batteries / rechargeable batteries
into fire or water.
Содержание 14124402L
Страница 3: ...14124402L 14124502L 1 14 3 2 4 5 6 8 8 11 12 13 7 9 9 7 15 16 17 10 15 B A 1 4 3 2...
Страница 11: ...12 GB Warranty and Service Manufacturer Briloner Leuchten GmbH Im Kissen 2 DE 59929 Brilon GERMANY...
Страница 19: ...20 CZ Z ruka a servis V robce Briloner Leuchten GmbH Im Kissen 2 DE 59929 Brilon N MECKO...