16 GB/IE
For HG06586D:
Place the mounting plate
3
on the ground then fixed it with earth spikes
1
(see fig. A).
Further steps for both types of installation:
For HG06586A, HG06586B, HG06586C:
Attach stand pipe
5
to the stand
3
or ground
spike
1
and tighten the fixing screw
2
if mount
the stand pipe
5
to the stand
3
(see fig. A1-2).
Hint:
Never install the fixing screw
2
though
the hole of stand pipe
5
but only fixed it on
the surface of the stand pipe
5
(see fig. A2).
Press the interlock
9
of stand pipe
5
and attach
LED tree
7
to stand pipe
5
(see fig. B).
For HG06586D:
Screw the stand pipe
5
into mounting plate
3
then attach LED tree
7
to stand pipe
5
(see fig. B).
Bend the individual branches of the LED tree
7
to the desired shape (see fig. C). Remind not to
bend all the branches just to one side (see fig. E).
The 10 m lead wire
6
must be unwound before-
hand when first use.
Insert the connector of the
10 m lead wire
6
into the socket of the power
adaptor
4
and tighten the screw connection,
in order to prevent moisture from penetrating
inside. Pay attention to the sealing ring. Then
plug the power adaptor
4
into a socket (see
fig. D).
Use the velcro cable fastenings
10
to secure
the 10 m lead wire
6
along the pipe (for
HG06586A, HG06586B, HG06586C) (see
fig. F).
Timer function
The timer button
8
has three functions:
1 x push of the button:
The product lights up continuously.
2 x push of the button:
The product lights up continuously for 6 hours
and then switches itself off for 18 hours. The
product will then switch on again for 6 hours at
the allocated time and then switch off for
18 hours.
Note:
The timer button
8
lights up when the
timer function has been activated.
3 x push of the button:
The product is switched off.
Cleaning and care
DANGER OF ELECTRIC
SHOCK!
First pull the power adaptor
4
out of
the socket.
DANGER OF ELECTRIC
SHOCK!
For reasons of electrical safety the
product must never be cleaned with water or other
liquids or immersed in water.
Do not use any solvents, petrol or similar items.
This would damage the product.
Only a dry, lint-free cloth should be used for
cleaning.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
