background image

7

LITTLE 

WONDER

PRO VAC SP

SAFETY

Fuel

Petrol (gasoline) and diesel 

fuels are flammable; petrol 

(gasoline)  vapors are explo-

sive.  Use extra care when 

handling.  

Store only in containers 

specifically designed for fuel.

MAINTENANCE SAFETY

In general

-  Maintain machine according to manufacturer's 

schedule and instructions for maximum safety and 
best results. 

Park machine on level ground. 

-  Never allow untrained personnel to service machine. 
-  Guards should only be removed by a qualified 

technician for maintenance or service.

Adjust or repair only after the engine has been 
stopped and the fan has stopped moving.

Disconnect  spark  plug  wire(s)  before  doing  any 

maintenance.

-  Replace parts if worn, damaged or faulty.  For best 

results, always replace with parts recommended by 
the manufacturer. 

-  Do not dismantle the machine without releasing or 

restraining forces which may cause parts to move 
suddenly.

Provide adequate support, e.g. jack stands for lifted 
machine or parts if working beneath.

-  Do not put hands or feet near or under rotating parts. 

Clean up spilled oil or fuel thoroughly.

-  Replace faulty mufflers.
-   To reduce fire hazards, keep the engine, muffler,  and 

fuel storage area free of grass, leaves, debris buildup 
or grease.

 

WARNING

Fans

 

Do not straighten or weld fans.  Replace damaged or 

failed fans.

When refueling or checking fuel level:

 

-  Stop the engine and allow to cool; 

 

-  Do not smoke;

 

-  Refuel outdoors only;

 

-  Use a funnel;

 

-  Do not overfill;

 

-  If fuel is spilled, do not attempt to start the engine 

until the spill is cleaned up and vapors have 
cleared.

 

-  Replace caps on fuel containers and tanks 

securely.

Sparks from static electricity can start fires or cause 

explosions.  Flowing fuel can generate static electricity.  

To prevent static electricity sparks:

-  Keep containers electrically grounded.  Do not fill 

containers in a vehicle or on a truck or trailer bed 

with a plastic liner.  Fill containers on the ground 

away from the vehicle.

When practical, remove petrol (gasoline) powered 
equipment from the truck or trailer and refuel it on the 

ground.  If equipment must be refueled on the truck 

or trailer, refuel from a portable container rather than 

a dispenser nozzle.

-  Keep the dispenser nozzle in contact with the rim 

of the fuel tank or container opening until fueling is 

complete.  Do not use a nozzle lock-open device.

-  If petrol (fuel) is spilled on clothing change it 

immediately.

STORAGE SAFETY

Stop the engine and allow to cool before storing.

Drain the fuel tank outdoors only.

Store fuel in an approved container in a cool, dry 
place.

Keep the machine and fuel containers in a locked stor-
age place to prevent tampering and to keep children 
from playing with them.

Do not store the machine or fuel container near an open 

flame, spark, or appliance, such as a water heater, or 

a pilot light.

Keep petrol (gasoline) storage area free of grass, 

leaves and excessive grease to reduce fire hazard.

Clean grass and debris from cutting units, drives, 

mufflers and engine to help prevent fires.

Содержание 5612-12-01

























Отзывы: