Little Tikes Real Wood Adventures 657931C3 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 48

Little Tikes Real Wood Adventures 657931C3 Скачать руководство пользователя страница 29

29

68

Step 28:

Stand the second Tower Leg Assembly upright. Ensure that the Floor Rails face the

outside of the Assembly and that the Tower Legs (003) are aligned with one another.

Step 29:

Attach (1) Floor Rail (007) to the Tower Legs (001) using (2) Bolts (B161) and (4)

Screws (S96). Ensure the predrilled holes are near the bottom edge of the Floor Rail

and that the Floor Rail is aligned with the Floor Rails (005) and (008).

Note: Do not use the Floor Rail (007) with the Little Tikes® Logo attached. It will be

used in a later step.

Step 106:

Align and attach (3) Window Boards (014) with the Roof Panel Boards using (8)

Screws (S91).

Note: Do not insert any Screws into the joints between the Window Boards.

Step 107:

Attach (1) Window Pane (073) to Window Boards (014) using (2) Screws (S91).

Attach (1) Window Pane (074) to the Roof Panel Boards (044) using (2) Screws (S91).

Secure the Window Panes (073) and (074) to each other using (1) Screw (S91).

«
...
27
28
29
30
31
...
»

Содержание Real Wood Adventures 657931C3

















































Отзывы:

Нет отзывов