11
Securing the Child
1) Make sure booster seat is properly positioned and
installed on vehicle seat as per the instructions in
(page 10).
2) Properly position child: sitting upright and all the
way back in the booster seat.
3) Raise the headrest to access upper belt guides.
Feed the diagonal portion of the seatbelt through
the guide on the side opposite the seatbelt buckle.
4) Fasten seatbelt across child: Lap portion of seatbelt
should rest within both lower belt guides. Diagonal
shoulder portion should route inside the lower
belt guide closest to the buckle and over child’s
shoulder.
5) Adjust headrest (page 9) to proper height: Upper shoulder guide should be slightly
above (at least 1 cm) the child’s shoulders.
6) Make sure seat belt is not twisted and lays flat across child’s lap, torso and shoulder.
7) Tighten the seatbelt by pulling the diagonal shoulder belt portion in the direction of the arrows.
8) Confirm seatbelt buckle is in correct position.
IMPORTANT:
Lap belt position should be as far forward and as low as possible over child’s
pelvis and contacting upper thighs.
IMPORTANT:
Diagonal seat belt portion should route inside the lower belt guide closest to
the buckle and over child’s shoulder. It should NOT be touching the neck.
NEVER
position the shoulder belt loosely or under the child’s arm or behind their back.
