ENGLISH
8
P/N 192061515
Rev AA April 2019
INSPECTION AND MAINTENANCE CHECK LIST
LEVER OPERATED STRAP HOIST
Visual
Monthly
Record Yearly Visual Weekly
Record 6
Months
Visual Daily
Record
Monthly
FREQUENT INSPECTION
All functional mechanisms for
proper operation
•
•
•
Hooks and latches for
deformation, chemical
damage, cracks & wear (See
ASME B30.10)
•
•
•
Hook latch operation
•
•
•
Web strap (See Web Strap
Inspection)
•
•
•
Levers for bends, cracks,
etc.
•
•
•
Hoist support for damage
•
•
•
PERIODIC INSPECTION
Evidence of loose pins, nuts
or rivets
••
•••
•••
Evidence of worn, corroded,
cracked or distorted parts
such as suspension frame,
levers, web strap
attachments, yokes, shafts,
pins and rollers
••
•••
•••
Evidence of damage to hook
retaining nuts and pins
••
•••
•••
Item
Normal Service
(Weekly Usage)
Remarks
Heavy Service
(Daily Usage)
Severe Service
(Daily Usage and/or in
severe weather conditions)
Figure 4 - Recommended Inspection and Maintenance Check List
• Visual inspection by operator or other designated personnel.
•• Visual inspection by designated person of conditions.
••• Visual inspection by designated person of conditions unless conditions indicate that disassembly should be done to permit detailed inspection.
NOTE:
All hoists are load tested at 125% of the rated capacity at the manufacturer. If load sustaining parts are altered, replaced or repaired, the hoist
must be load tested at rated capacity. This inspection and maintenance check list is in accordance with our interpretation of the requirements of the
Safety Standard for Manually Operated Hoists ASME B30.21. It is, however, the ultimate responsibility of the employer/user to interpret and adhere to
the applicable requirements of this safety standard
