background image

Treated properly it should be a faithful servant for years - and we hope you get the 
same amount of pleasure from it.  Before you do

l

please take a few minutes to read these instructions

l

we suggest you carefully unpack everything, lay it out on a clean, flat floor and 
identify everything on the parts list in these instructions. Do not throw away any 
packaging until you are sure you have all the parts. 

If you have any problems assembling the product please call our customer services 
on 01985 300588 and we will try and help. If for any reason you wish to return the 
product, you must disassemble the product and pack in the original packaging. 

Taking care of your product 

Your furniture should require no more than a regular dust off with a soft cloth. If the furniture is 
not painted  then a superior wood polish can be used - but never use polishes containing 
silicone. 
If necessary it can be cleaned with a damp cloth with a mild detergent solution - and then 
dried with a lint-free cloth. Never clean with abrasives or chemical cleaners. 
Direct sunlight or heat from a radiator can stain, discolour warp or crack furniture. 
We know furniture can be heavy but try not to drag furniture across the floor as this can 
damage it. 

Thank you for buying a 

 

 

                    

 

PRODUCT SAFETY

piece of furniture

If you have any problems please do contact us for help on e 
mail [email protected] or phone our

CUSTOMER SERVICES  01985 300588

The recommended size of the mattress is 183cm x 76cm (6` x 2`6)
Periodically check all fittings to ensure that none have come loose.
Keep away from direct sources of heat, such as electric, gas or coal fires.
Do not allow children to Climb on the furniture.
Using this furniture other than for its intended purpose could cause damage to 
the structure or serious injury to your child.
The Bed should not be used if any structural part is broken or missing.
If you can manage it, please try to persuade your children not to bounce on the 
bed.
Warning: The child`s bed should not be placed too close to other furniture or 
windows, blind cords, curtain pulls or other strings or cords, and should be placed 
either tight to any wall or have a gap of 300mm between the wall and the side of 
the bed.

Содержание SBD007













Отзывы: