Fit the ladder
Ladder right illustrations.
Fix 4 x wooden dowels into the right-hand ladder
string as shown.
Rotate the ladder
Gently engage the ladder notches over the
lower mattress rail and then push the right-
hand ladder string up against the bed legs,
aligning and engaging the wooden dowels
2 x 7cm bolts
2 x sleeve nuts
Connect the ladder string
2 x 7cm bolts, 2 x sleeve nuts and 1 x
3.5cm bolt
Fix the ladder string to the bed legs
using 2 x 7cm bolts and 2 x sleeve nuts
Connect the ladder to the lower bed
leg using the 3.5cm bolt
This can be a bit fiddly so do not
tighten up the upper fixings until you
have connected the lower 35mm bolt.
1 x 3.5cm bolt
Fix the front safety rails
2 x 6cm bolts, 2 x 9cm bolts and
4 x barrel nuts
Slide the two safety rails into the
wooden dowel holes. Now
connect the two rails using the
bolts shown, rotating them tight
through the barrel nuts.
2 x 6cm bolts
2 x 9cm bolts
Connect the ladder string
2 x 7cm bolts, 2 x sleeve nuts and 1 x
3.5cm bolt
Fix the ladder string to the bed legs
using 2 x 7cm bolts and 2 x sleeve nuts
Connect the ladder to the lower bed
leg using the 3.5cm bolt
This can be a bit fiddly so do not
tighten up the upper fixings until you
have connected the lower 35mm bolt.
