Fit the ladder
Ladder on left illustrated first followed by ladder on
right. (in two pages)
Fix 4 x wooden dowels into the left-hand ladder string
as shown.
Rotate the ladder
Gently engage the ladder notches over the
lower mattress rail and then push the left-hand
ladder string up against the bed legs, aligning
and engaging the wooden dowels
2 x 7cm bolts
2 x sleeve nuts
1 x 3.5cm bolt
Fix the front safety rails
2 x 6cm bolts, 2 x 9cm bolts and 4 x barrel nuts
Slide the two safety rails into the wooden
dowel holes. Now connect the two rails using
the bolts shown, rotating them tight through
the barrel nuts.
2 x 6cm bolts
2 x 9cm bolts
Connect the ladder string
2 x 7cm bolts, 2 x sleeve nuts and 1 x
3.5cm bolt
Fix the ladder string to the bed legs
using 2 x 7cm bolts and 2 x sleeve nuts
Connect the ladder to the lower bed
leg using the 3.5cm bolt
This can be a bit fiddly so do not
tighten up the upper fixings until you
have connected the lower 35mm bolt.
