6
ENG
CARE, STORAGE, REPAIR AND DISPOSAL
1. Keep this Device from exposure to higher humidity, direct sunlight, shocks.
2. Do not keep and use this Device near heating installations and open fi re.
3. Keep the Device clean and protect it from dust.
4. Contact of device with aggressive solutions is not allowed.
5. Protect the arm cuff and air tubes from contacting on sharp things.
6. This Device does not contain special controls to adjust the measurement
accuracy. Independent opening of manometer is prohibited. Repair the
Device only in authorized organizations.
7. Service life of device is indicated in section TECHNICAL SPECIFICATIONS.
Service life is determined from the moment of commodity delivery to the
customer. On expiration of the warranted service life apply from time to
time to authorized repair organizations to check the technical condition of
the Device.
8. Dispose of the Device and its components according to the application
local regulations. No special requirements to disposal of this Device are
defi ned by the manufacturer.
9. The arm cuff may withstand multiple sanitary treatments. The internal tissue
surface of the arm cuff (contacting on arm) may be cleaned with cotton ball
soaked in 3%-solution of hydrogen peroxide. At long use the partial color fad-
ing of the tissue coating of the arm cuff is possible. Washing and ironing of
the arm cuff are not allowed.
WARRANTY
1. The following LD product is covered by warranty for the period specifi ed
in the warranty card.
2. The warranty period for the arm cuff is 12 months from the date of sale.
3. The warranty liabilities are contained in the warranty card given at the sale
of this Device to a purchaser.
4. The addresses of organizations for warranty maintenance are given in the
warranty card.
