Little Cottage Sweetbriar Cottage, Руководство пользователя

Страница: 4 / 5

The Sweetbriar Cottage
Construction Manual
© 2007 Little Cottage Co. Page
13 14
15 16
9 10
11 12
Repeat at the top corner above door (and then in the
middle of corner, beside door). Secure the opposite
front corner using three (3) 2½” screws as shown in
step #6.
Carefully raise rear gable, setting as to allow a 2½”
overhang on both sides. Secure by driving three (3)
2½” screws through the bottom gable 2X and into the
rear wall’s top plate.
Repeat for the front gable. With front and rear gables now in place, locate and
set rafter plates. Using an angle to ensure that the
edge of plate is flush with the end of gable, secure
using a 2½” screw.
Repeat at center and the opposite end of plate. Then
repeat for the opposite side plate.
Locate center rafter and align as marked on the rafter
plate.
Set rafter in place and secure using a 2½” screw.
Repeat on opposite side.
Set center ridge beam in place and secure by
toenailing a 2½” screw through the ridge beam and
into the gable.
Inset
Rafter
plate
2½” overhang