9140053441 Rev. 1
1
LZ SERIES
EMERGENCY LED EXIT
Service Questions Call: (800) 334-8694
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety
precautions should always be followed, including
the following:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
All servicing should be performed by qualified
personnel only.
Do not mount near any heat producing equipment.
Equipment should be mounted in locations and at
heights where it will not be readily subjected to
tampering by unauthorized personnel.
The use of accessory equipment not recommended
by the manufacturer may cause an unsafe condition.
Do not use this equipment for other than intended
use.
In Class I Division 2 locations, do not replace any
non-metallic hardware with metal hardware.
Contact authorized agent for factory replacement
parts.
In Class I Division 2 areas, install equipment in
accordance with appropriate NEC articles plus any
other applicable codes.
To avoid static discharge, do not attach any
ungrounded metal hardware to the enclosure.
Do not use this equipment outdoors
.
CLASS I DIV 2
HAZARDOUS LOCATION
GROUPS A, B, C, AND D
ZONE 2 GROUPS IIC, IIB AND IIA
CLASS II DIV 2 GROUPS F AND G
AND CLASS III DIV 1 AND 2
INSTALLATION AND OPERATING
INSTRUCTIONS
Install only grounded wiring systems to supply
this equipment.
Free installation area of hazardous atmospheres
before wiring equipment or servicing, this reduces
the risk of accidental explosion due to inadvertent
battery shorting during installation.
SAVE THESE INSTRUCTIONS
WARNING – Shut off AC power to branch
circuits to which units will be connected. All
wiring should be per N.E.C. wiring methods for
Hazardous locations.
To maintain warranty, equipment with batteries
must be installed or placed on charge within
prescribed period after shipment.
Содержание LZ Series
Страница 5: ...9140053441 Rev 1 5 ...
