16.
Use extreme caution when cutting brush
and saplings.
The slender material may catch
the saw chain and be whipped around.
17.
Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly tensioned or lubricated chain may
either break or increase the chance for kickback.
18.
Kickback is the result of tool misuse and/or
incorrect operating procedures or conditions.
Kickback may occur when the nose or tip of
the guide bar touches an object, or when the
wood closes in and pinches the saw chain in
the cut.
Kickback can be avoided by taking proper
precautions as given below:
a.
Maintain a firm grip, with thumbs and fingers
encircling the Pole Saw handles, with both
hands on the saw and position your body
and arm to allow you to resist kickback
forces. Kickback forces can be controlled by
the operator, if proper precautions are taken.
Do not let go of the garden power tool.
b.
Do not overreach. This helps prevent
unintended tip contact and enables better
control of the garden power tool in
unexpected situations.
Page 5
c. Only use replacement bars and chains
specified by the manufacturer. Incorrect
replacement bars and chains may cause
chain breakage and/or kickback.
d. Follow the manufacturer’s sharpening
and maintenance instructions for the saw
chain. Decreasing the depth gauge height
can lead to increased kickback.
19. Use for cutting wood only. Do not use for cutting
plastic, masonry or non-wood building materials.
20. The battery Charger gets hot during
use. The Charger’s heat can build up
to unsafe levels and create a fire
hazard if it does not receive
adequate ventilation,due to an electrical fault,
or if it is used in ahot environment.
Do not place the Charger on a flammable
surface. Do not obstruct any vents on the
Charger.
Especially avoid placing the Charger on
carpets
and rugs; they are not only flammable,
but they also obstruct vents under the Charger.
Place the Charger on a stable, solid,
nonflammable surface (such as a stable metal
workbench or concrete floor) at least 1 foot
away from all flammable objects, such as drapes
or walls. Keep a fire extinguisher and a smoke
detector in the area. Frequently monitor the
Charger and Battery Pack while charging.
21.
Maintain labels and nameplates on the appliance.
These carry important safety information.
If unreadable or missing, contact Litheli for a
replacement.
22.
The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur.
It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Specifications
WWW.LITHELI.COM
Item U1PS21000
Charger Input Rating
120VAC / 60Hz
Charger Output Rating
36VDC / 3.3A
Battery Rating
40VDC / 2.5Ah / 90Wh
Battery Type
Chain Speed
4.5m/s 10%
Saw Chain
Oregon 10 in
40V Litheli Li-Ion
