Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
•
Before operating the gardening appliance, put on ANSI-approved safety goggles, hard hat
and other safety gear. Safety goggles and other safety gear need to be purchased by yourself.
Charging Battery Pack
1.
Place Battery Charger on a dry, flat,
fireproof surface indoors.
Note:
Allow battery to cool completely before
charging.
2.
Examine Battery Pack.
Do not charge a
cracked, open, or leaking Battery Pack, or
charge a non-recommended type of Battery
Pack.
3.
Battery Pack is designed to fit this Charger
specifically. If Battery Pack does not fit
Charger properly, do not try to insert it.
Do
not force Battery Pack into the Charger.
4.
Plug Charger into a grounded, 120VAC, 60Hz
receptacle. Green LED will blink, showing that
power is supplied to the charger.
5.
Slide Battery Pack onto Charger. Red LED will
light continuously while charging.
Note:
A fully discharged Battery Pack will take
about 1 hour to fully charge.
Note:
While charging, Battery Pack and Charger
may become warm to the touch and the Charger
′
s
fan may come on. This is normal.
6.
Green LED will light continuously when Battery
Pack is charged. Unplug Charger and remove
Battery Pack when finished.
7.
Allow Battery Pack to cool completely before use.
Installing and and Removing Battery Pack
1.
To install: Slide Battery Pack into slot on handle
until it clicks into place.
2.
To remove: Press both Battery Pack Release
Buttons and pull Battery Pack out of slot.
Workpiece and Work Area Set Up
1.
Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2.
There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Page 12
Item U1PS21000
WWW.LITHELI.COM
Battery
Pack
Battery Pack
Release
Button
