background image

Visit our website at: http://www.litheli.com

Operator's Manual

                                               Keep this manual for the safety warnings and precautions, assembly, 
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the 
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.

Save This Manual

40V BATTERY POWERED

CHAIN SAW

U1CS27042

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please  contact us: WWW.LITHELI.COM.

Copyright   2020 Litheli. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Litheli. 

Diagrams within this manual may not be drawn proportionally. Due to continuing 

improvements, actual product may differ slightly from the product described herein. 

Tools required for assembly and service may not be included.

©

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Содержание U1CS27042

























Отзывы: