SPECIFICATIONS
50/60Hz / 3A
• Output Supply : DC24V / 3A >5mins
•
DC24V / 5A Peak power >10s
• Dimensions (W x D) 174 x 174 mm
(6.85 x 6.85 in)
• Weight 3kg (6.61 lbs)
• Operating Temperature 0º to 40º C
(32º to 104º F)
• Storage Temperature -20º to 70º C
(4º to 158º F)
• Standby power: 1.3W / 0.02A
• Connected power: 1.5W / 0.03A
• Playing Music: 2.8W - 10.5W / 0.03A -
0.09A
**
*
Specifications subject to change without notice.
**
Power Consumption depends on the type of music & volume
- Increased Bass & volume requires more power loading on the
amplifier.
- Internet functionality may require payment of separate fee to a
service provider.
SPEAKER
• Sound Quality THD+N<0.009%,
40Hz-200Hz @ -10dB
• RMS Power: 50W RMS @ 4 Ohm load
• Sensitivity (1W/1m): 90dB
• Type: Class D (Digital)
• Audio Compression: 192Khz/24bits
• Bluetooth 4.1
• Woofer: 4” Polypropylene Driver / 2 x 4”
Passive radiator
MUSIC ACCESS
• Audio Formats Supported: MP3, WMA,
AAC (MPEG4), AAC+, ALAC, FLAC, APE,
WAV, OGG, LPCM
• Audio Sample Rate: up to 192kHz 24bit
• Music Services Supported by Lithe Audio
include; Airable Radio, Podcast, Tidal,
Deezer, Soundmachine, Amazon Music,
Napster, Spotify, etc..
• Operating Systems (for stored files)
Windows XP SP3 and higher; Mac OS X
10.6.8 and higher; NAS (network-
attached storage) devices supporting CIFS
MULTI ROOM
• Expandable up to 30 speakers within
same Wi-Fi network
WIRELESS NETWORKING
• Wi-Fi Connectivity: Wi-Fi CERTIFIED™
802.11 b, g, n, ac WPA™ - Personal
WPA2™ -
Personal WMM®, Wi-Fi
Protected Setup™
• Wireless connectivity works on
your home Wi-Fi network with both
2.4GHz/5GHz broadcast routers
• Internet connection required for access
to Internet radio stations, online music
services and software updates.
GENERAL
• Internal Power Supply : 100 - 240V,
11
SPOTIFY CONNECT
You will need to have the Spotify Premium account, the latest spotify app installed
and be connected to the same Wi-Fi network to play via Spotify connect directly.
Open Spotify app, on your phone, tablet or laptop.
Play a song and select DEVICES AVAILABLE at bottom of player page
Select your device and start listening to your spotify music
NOTE:
If your connection to speaker is lost, the device
may have weak Wi-Fi signal. Please visit: https://www.spoti-
EQ SETTING
To tune the Micro Sub Woofer, your device must be on the same network.
Download the Lithe Audio App, with speaker settings adjust the equaliser
settings as below:
LOW PASS FILTER
The low-pass filter eliminates the notes you don’t want your subwoofer to
play, leaving the bass and the low drums.
PHASE
This is used to match the subwoofer audio output to the main speakers.
Set the subwoofer to be either 0 or 180 degrees.
GAIN
Gain control enables you to blend the bass levels wuth the output of
other speakers within the system to achive optimal sound quaility.
CROSS OVER
The cross over frequency of the micro subwoofer is the frequency at
which your speakers tail off and your subwoofer kicks in with the bass. The
most common frequency range for crossover is 80Hz
Within the app there are avrious listening profile presets for common
listening tastes, select one of these if you are unsure of the detailed
settings needed. We have done this for you, all you have to do is set the
volume, listen and relax.
