Litex E-AVA52BNK5CR Скачать руководство пользователя страница 10

page 9

Troubleshooting.

Problem: 

Fan fails to operate.

Solutions:

1. Check wall switch to fan.
2. Verify that reverse switch is set completely in either 
direction.
3. Check to be sure code switches in remote control 
transmitter and receiver are set properly.
4. Check to be sure fan is wired properly.

Problem: 

Light kit not lighting.

Solutions:

1. Check wall switch to fan.
2. Check that bulbs are installed correctly.
3. Check to be sure code switches in remote control 
transmitter and receiver are set properly.
4. Check to be sure wires in canopy are wired properly.

5. Check to be sure that bulbs total no more than 190W. 

[Note: Lamping fan with bulbs that total more than 190W 
will cause the wattage limiting device to interrupt the flow of 
electricity to the light kit.]

Problem: 

Fan operates but light fails.

Solutions: 

1. Check that bulbs are installed correctly.
2. Check to be sure wires in canopy are wired properly.
3. Verify that molex connections from the light kit fitter 
are connected properly. 
4. Replace defective bulbs with same type of bulb.

5. Check to be sure that bulbs total no more than 190W. 

[Note: Lamping fan with bulbs that total more than 190W 
will cause the wattage limiting device to interrupt the flow of 
electricity to the light kit.]

Problem: 

Fan and light fail to operate with remote 

control.

Solutions:

1. Check battery power to remote control.
2. Check to be sure code switches in remote control 
transmitter and receiver are set properly.

Problem:

 Fan wobbles.

Solutions:

1. Use the balancing kit in one of the hardware packs. 

If 

no blade balancing kit is provided, please call Customer 
Support, 1-800-527-1292, to request one.

2. Check to be sure set screw(s) on motor housing yoke 
is (are) tightened securely.
3. Check to be sure set screw on hanging ball is 
tightened securely.

Warranty.

LITEX LIFETIME LIMITED WARRANTY:
LITEX INDUSTRIES, LTD. warrants this fan to the original 
household purchaser for indoor use under the following 
provisions:
1-YEAR WARRANTY:  LITEX INDUSTRIES, LTD. will replace or 
repair any fan which has faulty performance due to a 
defect in material or workmanship. Contact Litex Customer 
Service at 

1-800-527-1292

 to arrange for return of fan. 

Return fan, shipping prepaid, to Litex Industries, LTD. We 
will repair or ship you a replacement fan, and we will pay 
the return shipping cost.
5-YEAR WARRANTY: LITEX INDUSTRIES, LTD. will repair or 
replace, at  no charge to the original purchaser, any fan 
motor that fails to operate satisfactorily when failure 
results from normal use.
RETURN FAN MOTOR ONLY, shipping prepaid, to Litex 
Industries. We will repair or ship purchaser a replacement 
motor and Litex will pay the return shipping cost.
6-YEAR to LIFETIME LIMITED WARRANTY: LITEX 
INDUSTRIES, LTD. will repair the fan, at no charge to the 
original purchaser for labor only, if the fan motor fails to 
operate satisfactorily when failure results from normal use. 
Parts used in the repair will be billed to the purchaser at 
prevailing prices at time of repair.
    The purchaser shall be responsible for all costs incurred 
in the removal, reinstallation and shipping of the product 
for repairs.
    This warranty does not apply when damage from 
mechanical, physical, electrical or water abuse results in 
causing the malfunction. Deterioration of finishes or other 
parts due to time or exposure to salt air is specifically 
exempted under this warranty.
    Neither Litex Industries nor the manufacturer will 
assume any liability resulting from improper installation or 
use of this product. In no case shall the company be liable 
for any consequential damages for breach of this, or any 
other warranty expressed or implied whatsoever. This 
limitation as to consequential damages shall not apply in 
states where prohibited.

Parts Replacement.

For parts and information, please refer to
"Parts Inventory" on page 2.
Litex Customer Support:

1-800-527-1292

Содержание E-AVA52BNK5CR











Отзывы: