page 7
9. Blade Assembly.
10. Light Kit Assembly.
motor housing
light kit fitter
Remove 3 screws from light kit fitter. Locate
BLACK
(or
BLUE
) and
WHITE
wires in the
switch housing labeled LIGHT. Remove and
discard plastic that holds these 2 wires
together.
Next, locate
WHITE
and
BLACK
wires in light
kit fitter labeled LIGHT.
["Light Kit Assembly" continued on next
page.]
blade screw and washer
motor housing
switch
housing
white wire
black wire
white wire
Time Saver
: Washers for blade screws can be
set on each blade screw prior to installing
blades.
Locate 15 blade attachment screws and
washers in one of the hardware packs. Hold
blade arm up to blade and align holes. Insert 3
blade attachment screws (along with washers)
with fingers first and then tighten screws
securely with a Phillips screwdriver. Repeat for
the remaining blades.
Remove blade arm screws and lock washers
from fan motor and set aside. Then, if applicable,
remove plastic motor locks from underside of
motor and discard plastic motor locks (
save
blade arm screws and lock washers to secure
blade arms
). Align blade arm holes with motor
screw holes and attach blade arm with lock
washers and blade arm screws. Before securing
screws permanently, repeat with remaining
blade arms. Securely tighten all screws.
Note:
Tighten blade arm screws twice a year.
plastic
motor
lock
black (or blue) wire
blade arm
blade
blade attachment
screws and washers
lock washers
blade arm
screws
