LiteSheet Solutions
Page
3
of
6
CONTENTS OF KIT
•
BriteCor Damp Location Stik luminaire
•
Mounting brackets
•
(4) M5 x 5mm screws
•
(4) T-nuts
TOOLS AND ADDITIONAL PARTS REQUIRED
•
Philips head screwdriver
•
Mounting screws
Installation
1.
Turn off power source.
2.
Locate T-nut in channel on extrusion. Line up
either L or flat bracket holes with T-nut holes.
Using a M5 x 5mm screw, attached bracket to
T-nut. Tighten until T-nut rotates in channel.
L-Bracket shown.
3.
Use 3 brackets for each 40” Stik module. Use
2 brackets for each 20” Stik
module.
4.
Use appropriate hardware to mount to final
surface.
