LITEMAX Litile34 Скачать руководство пользователя страница 21

Страница: 21 / 21

Page 21

8.0 Maintenance and Services

The display should be serviced at least annually. This should include a lamp change and

careful cleaning of the inside of the modules. Please contact Litemax Customer Support
for further details.

Optical Fiber

Fragile parts, especially in the corner. Always protected by the side panel.

Cleaning

The display should be cleaned with a dampened cloth. Do not use solvents to clean.

Replacing Fan Filters

If the display is used in an environment with high levels of dust, the fan filters may start to
become blocked, reducing the efficiency of the fans. They should be replaced on a regular

and frequent basis.

Customer Support

If any additional information is required, please contact Litemax Customer Support at
the following:-

[email protected]

http://www.signage.litemax.com/

Содержание Litile34






















Результаты поиска

Содержание Litile34

Отзывы:

Похожие инструкции для Litile34

Бренды по названию

Популярные бренды

LITEMAX Litile34, Руководство по эксплуатации

Результаты поиска

Содержание Litile34

Отзывы:

Похожие инструкции для Litile34

Бренды по названию

Популярные бренды