background image

 

WARNING

Risk of electric shock from high humidity.
•  Do not operate or expose this product to rain or moisture.

•  If the product is exposed to moisture, allow unit to dry for a period of 4 hours to prevent any electrical

  damage from occurring to electrical components.

•  Confirm all electrical connections are securely fastened to avoid electrical shorts occurring from moisture

  build-up on the connectors.

 WARNING

Risk of fire.
•  Do not operate this product if the ambient temperature exceeds 122°F (50°C).

•  Do not place the product on or near heat sources.

•  Do not expose product to open flames.

•  Intense heat cause damage to the product. Intense heat can damage unit.

•  When using in high ambient temperatures, allow the product to cool down before storing and/or transporting.

 WARNING

Heavy load fixture. Risk of injury and/or damage.
•  The product and all attached accessories must be secured properly when mounted above floor level.
•  Local safety regulations must be followed when operating unit.
•  Disconnect all cables before storing and/or transporting unit.

2

 DANGER

•  Repairs must be performed by LiteGear or an authorized service agent.

•  Maintenance to be performed only when identified in this user guide. 

•  Hight voltage! Risk of electric shock and fire.

•  Follow all safety information and operation instructions before operating or installing this product or system.

•  Not following these instructions may result in injury, death, and equipment damage.

•  For use solely and exclusively as described in the instructions.

•  Confirm local AC power matches the voltage and frequency range printed on the product specifications label use.

•  Never use the cables for transportation. Never hang the product from its cables.

•  Do not bypass or remove any safety feature of the product.

 NOTICE

•  LiteGear products are to be operated by qualified personnel only.

•  Not intended for household use.

•  Repairs to be made by qualified LiteGear technician only.

•  Follow all practical safety precautions when using this product.

•  Product surface can be cleaned by lightly spraying a mild detergent onto a soft cloth and wiping the product. 

•  Using this device other than described above is not permitted and can damage the product and can lead to

  personal injury.

•  If the external flexible cable or cord of this product is damaged, it shall be replaced by a special cord or cord

  exclusively available from the manufacturer or an authorized service agent.

1

Содержание LiteDimmer Spectrum AC600




















Отзывы: