Assembly
Tools Required:
Scissors
1/2 inch socket or open-end wrench
5/16 inch Allen wrench (provided)
Read below & follow pictures.
NOTE: Two people are required for safe assembly.
NOTE: Your HugN-Go may look different than the following
images.
1.) Inspect shipment and note any
visual damage to box and/or crate
2.) Remove screw located at the
bottom of crate
3.) Lift off exterior box in order to
expose equipment
4.) Examine contents. Report any
damage to equipment immedi-
ately to Mobility Research Service
& Parts Department
6.) Open cardboard harness and
accessories box.
7.) Inspect contents of accessories
box for damage.
8.) Carefully cut all black plastic
straps securing base to pallet.
9.)
Remove shrink wrap from all four
casters.
5.) Remove cardboard accessories
box.
10.) Using both people, remove
base from pallet.
NOTE: If you have any questions during installation, please
contact Mobility Research Service & Parts Department for
assistance.
CAUTION: DO NOT USE UTILITY KNIFE
TO OPEN BOX
Assembly Instructions: