ISO 9001 CERTIFIED
www.liteputer.com.tw
Lite-Puter
EDX-607E [EUM-A]
19
2-20
Enable/Disable Partition Function
STEP-1Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
until the screen shows
.
STEP-2Press
▲
to turn on partition function
press
▼
to turn it off.
STEP-3Press
ENTER
to save and exit.
2-21
Checking Software Version
Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
until
the screen shows
.
LED screen shows the software version as
.
2.22
Enable/Disable IR Remote Control
STEP-1Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
till the screen displays
.
STEP-2Press
▲
to turn on IR remote control( EDX-607 under the IR remote
control)or press
▼
to turn off IR remote control
EDX-607 out of IR remote control
.
STEP-3After setting, press
ENTER
to save and exit.
2-23
Enable/Disable SC5/6 Overlap Scene Function
On usual, when user select a scene, the previous scene will be replaced. This
function is for overlap SC5 or SC6 to another scene. If you recall one of SC1-4 first,
then recall SC5 or SC6, the later one will overlap to the previous one, so user will see
two scenes at the same time. If there is any channel that is in both scenes, it will be
outputted at the higher dimming value.
C1
Curve
C2
Curve
C3
Curve
