ISO 9001 CERTIFIED
www.liteputer.com.tw
Lite-Puter
EDX-607E [EUM-A]
14
1.Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
4 times
to select the function or press
FCN
+
CH5_UP
at the same time, the screen will
display,
2.Press
ENTER
to edit the clock, it will display,
3.Press
once shift to hour setting and then press
▲
10 times or long hold
▲
to set hour as
4.Press
once, it will switch to minute setting as
5.Press
▲
24 times or long hold
▲
to set minute as
6.Press
ENTER
to save and exit.
2-9
Timer ON/OFF
STEP-1 Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
5 times to select the function or press
FCN
+
CH6_UP
at the same time, the screen
will display timer status as
.
STEP-2Press
▲
to turn on timer ;press
▼
to turn it off.
STEP-3Press
ENTER
to save and exit.
2-10
Dimming /Switch (Non-dimming) Mode Setting
When dimming is unnecessary, users can set the channel to switch mode and control
it with either 100% on or totally off.
If any channel is set in switching mode, it will be turned on to 100%
immediately when the input is over 51% and turned off immediately when
the input is less than 20%. This function is avoid fixture blink.
STEP-1 Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
6 times to select the function or press
FCN
+
CH1_DOWN
at the same time, the
screen will display,
STEP-2Press
or press
shift from channel 1 to channel 6. Press
S
shift from channel 7 to channel 12. Press
CH1- CH12 UP
to set channel as switch
mode
S
; press
CH1- CH12 DOWN
to set channel as dimming mode
d
.
When you view each channel’s mode status, you can press
▲
to set it as switch
mode
S
, press
▼
to set it as dimming mode
d
.
STEP-3Press
ENTER
to save and exit.
Example:
Set channel 1 and 10 to switch mode. The steps are as follows.
1.Long hold
FCN
for 3 seconds to enter function menu and then press
FCN
6 times
to select the function or press
FCN
+
CH1_DOWN
at the same time, the screen
