EPX-410D/420D/430D/810D/820D/830D [
STEP-2: Press
【
▲
】
or
【
▼
】
to select from
STEP-3: After setting, press
【
DMX
NOTE: After initialization, the default setting
4-5 Partition Setting
Generally, all channels on EDX/EPX devices
make EDX/EPX devices more flexible, you can assign each channel on
different zones by using partition function. For example, you assign channel 1
partition 1 and channel 3 – 4
connected to EPX-420D, one is set to zone 1; the other is set to zone 2. If scenes are recalled by
ECP-106 of zone 1, only channel 1
recalled by ECP-106 of zone 2, only channel
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
zone 1)
zone 1)
zone 1)
zone 1)
Channel 3 and 4 on EDX/EPX devices in zone
Channel 3 and 4 on EDX/EPX devices in zone
Channel 3 and 4 on EDX/EPX devices in zone
Channel 3 and 4 on EDX/EPX devices in zone
410D/420D/430D/810D/820D/830D [EUM-B]
to select from Scene ON/OFF or Scene Overlap ON/OFF
DMX
】
to save.
After initialization, the default setting of these two functions is OFF.
EDX/EPX devices can be only set to only 1 zone (Please refer 3
more flexible, you can assign each channel on EDX/EPX devices
different zones by using partition function. For example, you assign channel 1
4 on EPX-430D to partition 2. There are 2 control panels (ECP
, one is set to zone 1; the other is set to zone 2. If scenes are recalled by
106 of zone 1, only channel 1 – 2 on EPX-420D will change their dimming levels. If scenes are
106 of zone 2, only channel 3– 4 on EPX-420D will change their dimming levels.
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
Figure: Channel 1 and 2 on EDX/EPX device in zone 1
Figure: Channel 1 and 2 on EDX/EPX device in zone 1 (channel 1 and
(channel 1 and
(channel 1 and
(channel 1 and 2 are controlled by ECP panel in
2 are controlled by ECP panel in
2 are controlled by ECP panel in
2 are controlled by ECP panel in
Channel 3 and 4 on EDX/EPX devices in zone
Channel 3 and 4 on EDX/EPX devices in zone
Channel 3 and 4 on EDX/EPX devices in zone
Channel 3 and 4 on EDX/EPX devices in zone 2 (channel 3 and
2 (channel 3 and
2 (channel 3 and
2 (channel 3 and 4 are controlled by ECP panel in zone 2)
4 are controlled by ECP panel in zone 2)
4 are controlled by ECP panel in zone 2)
4 are controlled by ECP panel in zone 2)
15
or Scene Overlap ON/OFF.
(Please refer 3-2). To
EDX/EPX devices to
different zones by using partition function. For example, you assign channel 1 – 2 on EPX-420D to
to partition 2. There are 2 control panels (ECP-106)
, one is set to zone 1; the other is set to zone 2. If scenes are recalled by
will change their dimming levels. If scenes are
will change their dimming levels.
2 are controlled by ECP panel in
2 are controlled by ECP panel in
2 are controlled by ECP panel in
2 are controlled by ECP panel in
4 are controlled by ECP panel in zone 2)
4 are controlled by ECP panel in zone 2)
4 are controlled by ECP panel in zone 2)
4 are controlled by ECP panel in zone 2)
