manualshive.com logo in svg

Lite Machines LMH-110, Руководство оператора

Поделиться
Скачать
Lite Machines LMH-110 Скачать руководство пользователя страница 1

W

arnings

WARNING!

THE RADIO CONTROLLED MODEL HELICOPTER BUILT FROM THIS KIT IS
NOT A TOY, AND IS NOT MEANT FOR CHILDREN. IT IS A FLYING MACHINE
CAPABLE OF CAUSING PROPERTY DAMAGE AND SERIOUS BODILY HARM
TO THE OPERATOR AND SPECTATORS IF NOT BUILT AND OPERATED
CORRECTLY AND RESPONSIBLY. ROTATING COMPONENTS, ESPECIALLY
THE MAIN ROTOR BLADES, ARE AN EVER-PRESENT DANGER.

WARNING!

Helicopters, by their nature, are not positively stable. Even if assembled and
adjusted properly, helicopters will not hold a particular flight position without constant 
control inputs from the pilot, and will not automatically recover from an unwanted
flight attitude without pilot intervention.

WARNING!

It is your exclusive responsibility to correctly and responsibly build, maintain and
operate this helicopter. Lite Machines has spent considerable time making this
product reliable and easy to build, but only the operator can ensure that it is safe.
Because the safe operation of this helicopter is beyond the control of the
manufacturer and distributor, the owner/operator assumes all risk of use.

WARNING!

THIS PRODUCT CONTAINS CHEMICALS WHICH ARE KNOWN BY THE STATE
OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND/OR OTHER
REPRODUCTIVE HARM.

 Many common materials, such as metals, plastics, glues,

fuels, lubricants and coatings contain chemicals in varying amounts and
concentrations which will cause harm if introduced into the human body. Lite
Machines strives to produce safe and reliable products, and is interested in the
well-being of every user of its products. For more information on chemicals contained 
in Lite Machines’ products, please contact Lite Machines Corporation. For further
information on toxic or dangerous chemicals,  please refer to California’s health and
safety codes sections 25249.5-13.

Op er a tor's Guide

Warnings

LITE MA CHINES

Содержание LMH-110


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды