29
V.3.0
28
V.3.0
C
hAnging
the
direCtion
of
the
door
opening
The doors of the refrigerator-freezer can be made to open the opposite way around if desired.
•
To do so, remove the door shelves and follow the steps below.
•
Use an 8 mm wrench and a Phillips screwdriver and a flat-head screwdriver.
•
This operation requires 2 people to carry out. If necessary, call in a qualified person.
WARNING: Unplug the appliance from the
mains before you start changing the doors
around.
1. Remove the upper hinge cover. While holding the refrigerator compartment door against
the appliance, unscrew the three screws that attach the top hinge to the door and remove
the hinge.
2. Carefully lift the refrigerator compartment door up and place it on a soft surface
to avoid scratches.
3. Unscrew the two screws that hold the central hinge and remove the hinge.
4. Remove the door from the freezer compartment.
5. Unscrew the 2 screws that hold the lower hinge on the right side of the refrigerator and
remove the lower hinge.
Hinge cover
Screws
Upper hinge
Refrigerator compartment door
Central hinge
Screws
Lower hinge
Screws
A
dequAte
ventilAtion
Make sure that air can circulate freely around the appliance to ensure that it can work properly.
Please leave at least 30 cm free space above the appliance, 5 cm at the back and 10 cm on
each side (see figure below). Also, make sure you leave enough space for the doors to open
(see figure below).
l
evelling
The appliance must be made level to prevent vibration in use. To level the appliance, adjust
the front feet.
Adjustment
W
idtH
H
EigHt
d
EPtH
a
B
C
E
f
595
mm
1855
mm
596
mm
966
mm
1200
mm
135 °C
50
mm
100
mm
W
idtH
H
EigHt
d
EPtH