Lister Petter LT and LV Operators Handbook
page 17
4.10 Draining and Filling the Oil Sump
Before draining the oil read, "4.2
Precautions for Filters and Elements".
CAUTION
Do not overfill with lubricating oil as this
may have a detrimental effect on engine
performance.
1. If possible run the engine immediately
before draining the oil.
2. Place a suitable container under the
drain plug.
3. Remove the drain plug (A).
Figure 4.10.1 Oil Drain
4. Clean and coat the threads of the
flanged drain plug with Wellseal and
the tapered plug with Hylomar PL32/
M or Three Bond 1110B.
5. Replace the drain plug taking care not
to over-tighten it.
6. Fill the sump through the oil filler to the
top mark on the dipstick (B).
Figure 4.10.2 Oil Filler
7. Start the engine, run it for a few minutes
and check the drain plug does not leak.
8. Stop the engine, allow the oil to settle
and check the level on the dipstick.
9. Add more oil if necessary.
Oil Sump Capacity
litres
pints
US qts
LT1
1.3
2.3
1.3
LV1
1.3
2.3
1.3
Capacity Between Dipstick Marks
litres
pints
US qts
LT1
0.20
0.35
0.21
LV1
0.20
0.35
0.21
4. Engine Servicing
- draining the sump
