SCU800-03 & SEC15
δ-LIST Manual
4.1.3 STRIPPING THE SENSOR CABLE
The sensor cable is stripped as shown below:
4.1.4 CRIMPING
Male
δ-LIST
connectors (CLS2) are crimped onto the ends of the sensor cable which terminate in
connection boxes (CBO). When crimping make sure that the contacts are placed directly on the
conductors and do not cause short circuits between conductors. (Note the instructions in the Crimping
Tool Manual.)
60T023-01 / 24/01/08
LISTEC GmbH
Page 13/28
BEL * Dyyyxx * LISTEC
BEL * Dyyyxx * LISTEC
20,00 cm
1.) Use a LIST cable knife to score the SEC approximately 20cm from the end:
2.) Note the orientation of the
flat cable in the SEC:
3.) Bend the SEC on the score, taking into account
the orientation of the flat cable:
4.) Strip off the cable jacket and filling material carefully:
5.) Cut off the Kevlar strands.
BEL * Dyyyxx * LISTEC
Flat cable
conductor
GND DATA
DATA marking
CLS2 Crimping contact