Operation
Grinding machine SMD 123 RE
49
6.2
Dressing E-aggregate
Supply dressing sheet with a lot of contours (preferably stainless)
Dressing sheet SMD 123 RE LISSMAC 1055737
Adjust sheet thickness to the thickness of the dressing sheet
Activate E-aggregate, deactivate R-aggregate
Move dressing sheet into machine (using „service-mode“)
Set E-aggregate to 3 mm pressure by turning the crank handle. The lamella brushes must set
into the dressing sheet about 3 mm.
Take dressing sheet out of machine (using „service-mode“)
Leave service-mode. Set feeding speed to 0,5m/min
Start machine and process the dressing sheet permantly for 3h! The lamellas of the brushes
will get softer and more flexible. Also the „sharp grit spikes“ will be eliminated.
This process must be carried out in order to be able to process small parts right from the start.
Otherwise it will be tricky to process small parts from the beginning.
Following pictures will show the difference beetween „new“ and „dressed“ E-Tools
:
approx. 920 mm
approx. 750 mm
sheet thickness ca. 4 – 8
R
E
3 mm
