Lissmac SBM-M 1000 B2, Руководство по эксплуатации

Страница: 30 / 54

Operation
30 Steel Brush Machine SBM-M 1000/1500 B2
5.2.5 Turn on the motors of the brush units
Before turning on the motors, the following conditions must be checked:
Acceptance of the workpieces at the output side of the machine is ensured.
Contamination such as material residue and dust deposits are removed.
All brush belts are checked for damage (visual inspection).
Place the main switch on the back of the machine into the "1" position.
Make sure that all malfunctions are corrected.
Be sure that both EMERGENCY STOP switches are disengaged.
Abb. 17: Turn on motors
1 ON/OFF switch
Turn on the motors with the ON/OFF switch (1). The brush units and (if
selected) the transport belt are started.
Before brushing can begin, the following pre-requisites must be met:
The plate thickness of the workpiece is measured and set on the machine
(see Chapter 5.2.4).
Feed speed is set (see Chapter 5.2.2).
Brush units are positioned correctly.