5
/
11
Lisheng (Fujian) Communications Co., Ltd.
You can preset a revert channel when a valid signal is detected, press [PTT] key to stop scan and
switch to the preset revert channel to transmit.
Priority Channel Scan
Sometimes you may need to keep an eye on a prefer channel while you are scanning other channels.
You can set up any channels as the priority channel, which means the radio will scan this priority
channel and other normal channels alternately. Press the programmed “Priority Channel Scan” side
button to activate this function and press this button again to exit. For example, there are 3 channels
CH1, CH2, CH3 and 1 priority channel on the scan list. Then the priority scan will become:
Pri
ĺ
CH1
ĺ
Pri
ĺ
CH2
ĺ
Pri
ĺ
CH3
ĺ
Pri
ĺ
CH1
ĺ
Pri ……
Tx Power Level
Press the programmed side button to adjust TX Power. If your current power is high, when you press
this side button, the power will switch to low power and the radio will report " Low power'. Press again,
the power will switch to high power and the radio will report “High power”.
You can set up the appropriate power level via software according to the current communication
environment and requirements. Tx low power helps you save the battery power and reduce the risk of
interfering with other users, so we suggest you to select low power transmitting when the
communication distance is short and the communication quality is guaranteed.
VOX Function
VOX means voice-operated-transmission, the radio can transmit without pressing PTT key.
ƹ
VOX On/Off
You can open "VOX" function in some specified channels via software. Press programmed “VOX” Side
button to enable VOX mode, press this button again to disable VOX mode. The radio will report “VOX
On” or “VOX Off”.
Note
: 1. VOX function is valid only when you are using a VOX earphone.
2. VOX mode will be memorized after you power off the radio.
ƹ
VOX Delay Time
After the radio finishing transmitting and turn back to receiving mode, the rest part of your conversation
may not be transmitted completely. So you can set up a VOX Delay time (0.3-3S) to avoid this
situation.
Voice Announcement
When you power on the radio or turn the channel knob, the radio will automatically report the current
channel position. You can choose English/Chinese voice announcement or disable voice
announcement.