Lisheng LS-A8 Скачать руководство пользователя страница 10

Страница: 10 / 11

0 /

Lisheng (Fujian) Communications Co., Ltd.

Precation and Notices

Government law prohibits the operation of unlicensed radio transmitters. Illegal operation is

punishable by fine or imprisonment Of both.

To avoid problem caused by electromagnetic interference and electromagnetic compatibility,

please turn off the transceiver at the sites where you are required, such as hospital, airplane etc.

In the vehicle equipped with air bag safety, don't put the transceiver within the scope of the air bag

inflation.

Please turn off the transceiver before step into the inflammable and explosive places.

Don't transmit for a long time, it may damage the transceiver or it may cause scald.

Don't use the transceiver which antenna is damaged or else when the exposed metal touch the

skin, it may cause scald also.

Don't expose the transceiver to long periods of direct sunlight, nor place it close to heating

appliances.

If belt the transceiver on with belt clip, please notice that the distance Between body and antenna

should be more than 5cm when transmitting.

If an abnormal odor or smoke is detected coming from the transceiver, switch OFF the power

immediately and remove the optional battery pack from the transceiver. Contact our dealer nearby.

Содержание LS-A8











