DMR
DIGITAL
TWO
WAY
RADIO
DMR
DIGITAL
TWO
WAY
RADIO
Accessories Assembly and Disassembly
Install & Remove the Battery
Install the Battery
1. Align the battery pack with the grooves on the chassis of transceiver.
2. Handhold the transceiver, and press the battery pack via thumb and
forefinger.
3. Slide the battery pack upward until it is slid into grooves with a ‘click’.
Remove the Battery
1. Push the battery pack latch downward to unlock it.
2. When the battery pack is loosened from the groove of transceiver, take
out the battery pack.
Installing/Removing the Antenna
Hold the bottom end of the antenna and clockwise screw it onto the mating
connector on the transceiver until it is tight. And counter-clockwise screw it
off the mating connector on the transceiver.
Installing/Removing the Belt Clip
Installing the Belt Clip
1. Line up the holes and insert 2pcs screws.
2. Use the correct fit of screwdriver to tighten clockwise.
Removing Belt Clip
Unscrew 2pcs screws from the holes.
CAUTION:
Never
hold
the
antenna,
and
sway
the
transceiver.
