SAFETYTRAINING
INFORMATION
Lisheng (Fujian) Communications Co., Ltd.
radio generators RF electromagnetic energy
during transmit mode. This radio is designed for and classified as “Occupational Use Only”,
meaning it must be used only during the course of employment by individuals aware of the
hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the
“General Population” in an uncontrolled environment.
This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only”. In addition,
Lisheng (Fujian) Communications Co., Ltd. complies with the following Standards and Guidelines with
regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to
Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields– RF and Microwave.
The following accessories are authorized for use with this product. Use of accessories other than those (listed in the
instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure.
To
ensure
that
your
expose
to
RF
electromagnetic
energy
is
within
the
FCC
allowable
limits
for
occupational
use,
always
adhere
to
the
following
guidelines:
DO NOT
operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you
to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or
antenna specifically authorized by the manufacturer for use with this radio.
DO NOT
transmits for more than 50% of total radio use time (“50%duty cycle”). Transmitting more than 50% of the time
can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX indicator”
lights red. You can cause the radio to transmit by pressing the “PTT” switch.
ALWAYS
keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the belt-clip
which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance
requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna
at least 5 cm (2 inches) from your mouth, and slightly off to one side.
T
he
information
listed
above
provides
the
user
with
the
information
needed
to
make
him
or
her
aware
of
RF
exposure,
and
what
to
do
to
as
‐
sure
that
this
radio
operates
with
the
FCC
RF
exposure
limits
of
this
radio.
Electromagnetic
Interference/Compatibility
During transmissions, Lisheng (Fujian) Communications Co., Ltd. generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where
signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation
such as hospitals, aircraft, and blasting site
s.
Occupational/Controlled
Use
The
radio
transmitter
is
used
in
situations
in
which
persons
are
exposed
as
consequence
of
their
employment
provided
those
persons
are
fully
aware
of
the
potential
for
exposure
and
can
exercise
control
over
their
exposure.
